
5.8 GHz Outdoor Wireless Bridge Kit, 300 Mbps, 3 km (Pair)
Pair of outdoor 5.8 GHz bridges with one-button digital pairing that links IP cameras or a remote network up to 3 km away without new cable.
- 300 Mbps
- Up to 3 km
- One-button pairing
- IP65
- Minimum order
- 1 pair
- Samples
- Available
Specifications
| Standard | IEEE 802.11a/n |
|---|---|
| Frequency | 5.8 GHz (5180–5825 MHz) |
| Data rate | 300 Mbps (wireless) |
| Coverage | 0–3 km point to point (line of sight) |
| Antennas | Built-in 14 dBi dual-polarized directional |
| Transmit power | 23 dBm ± 1 dBm |
| Ethernet port | 2 × 10/100 Mbps RJ45 |
| Power input | 24–48 V passive PoE or 12 V DC 1 A; under 6 W |
| IP rating | IP65, 2 kV lightning protection |
| Pairing | Digital display (16 channels) with one-button pairing; A/B switch |
| Modes | Bridge (point to point and point to multipoint), AP, client, repeater |
| Camera capacity | Up to 15 IP cameras per link (manufacturer rating) |
| Chipset | Qualcomm AR9344, 64 MB RAM |
| Mounting | Pole or wall |
| Package | 2 bridges, 2 × 24 V 1 A PoE adapters, stainless hose clamps, manual, warranty card |
| Color | White |
Manufacturer specification. Contact us to confirm compatibility with your equipment before ordering.
Typical use
Set one bridge to A (the network side) and the other to B (the remote side) with the slide switch, select the same channel on the digital display, and press the pairing button. The pair links up without a phone, PC or web setup and acts as a transparent wireless cable, so cameras or a whole remote network on the far side join the main network without trenching. Typical sites are construction sites and tower cranes, elevators, car parks, factories, docks, farms and links between neighbouring buildings. One A unit can also feed several B units for point-to-multipoint links.
Notes before ordering
- 3 km is the manufacturer’s rating for a clear line of sight. Trees, buildings and hills between the two ends shorten the usable range a lot. Send us the distance and a photo or map of the path and we will check it.
- 300 Mbps is the wireless link rate and the Ethernet ports are 10/100 Mbps. The manufacturer rates one link for up to 15 IP cameras; tell us your camera count and bitrate and we will confirm.
- Power is 24–48 V passive PoE through the supplied adapter, or 12 V DC. The datasheet does not list standard 802.3af/at PoE, so ask us before powering it from a standard PoE switch. Keep the PoE cable run within 65 m of solid Cat5e or better.
- Rated IP65 for outdoor mounting. Point the cable entry downward.
- 2.4 GHz versions (300 m to 3 km) and other 5.8 GHz ranges (2 km to 4 km) are available on request. For gigabit throughput see SP-WL305.
